Quest Construction Services, Inc.

HIGHEST PERFORMING ROOFING
SYSTEMS WITH UNMATCHED BEAUTY.

New roof or attic insulation... Quest can help!

ENERGY EFFICIENT
COOL ROOF COLLECTION.

FREE in-home estimates...partner with the BEST contracting team.

THE CLEAR CHOICE FOR ENERGY
EFFICIENT WINDOWS & DOORS

Need to lower your energy bill? Let Quest help!

BEAUTIFUL SOLUTIONS TO
PROTECTING YOUR HOMES EXTERIOR

Zero down, NO payments until December 2018.

10 Steps Application Process

Step 1 - Inspection

Procedure:

  • A complete inspection of your home's exterior

Results:

  • Reveals surgace deterioration including chipping, flaking, peeling and suspected areas.
Flaking exterior wall

Step 2 - Trenching

Procedure:

  • Trench around perimeter of home where possible.

Results:

  • Inhibits capillary action of ground moisture.
  • Helps eliminate costly repairs from decay at foundation.
Tex Cote technician trenching outer wall

Step 3 - Pressure Washing

Procedure:

  • Entire house is cleaned using powerful, power cleaning action.

Results:

  • Removes dirt, stains, loose paint and foreign substrates.
  • Reveals-surface areas in need of repair or patching.
  • Removes surface mildew or algae.
  • Provides a clean, tight surface for bonding of COOLWALL®Textured or Smooth Primer and the TEX•COTE® COOLWALL® SUPER•COTE™ finish.
Tex Cote technician pressure washing outer wall

Step 4 - Repair and Patch

Procedure:

  • Deteriorated area is prepared, caulked and patched using TEX•BOND™ and FLEX•PATCH, specially formulated bonding and patching materials.
  • Patching shall be performed on all affected areas as close to the original surface design as possible. Caulking shall be performed around windows, doors, metal flashings, and other areas of water penetration.

Results:

  • Helps correct surface defects.
  • Helps create a sound and uniform surface for the coating.
Close up of caulking on outer wall with and inset image of Tex Cote technician caulking outer wall

Step 5 - Masking

Procedure:

  • All doors, shrubs, trim, windows, lawn area and surfaces not to be coated are carefully covered.

Results:

  • The most professional looking job possible.
  • Prevents overspray.
Two Tex Cote technicians masking windows on outer wall

Step 6 - First Coat of Armor - COOLWALL® Textured or Smooth Primer is applied

Procedure:

  • Sprayed on thick using heavy duty equipment at a pressure of up to 3000 psi.

Results:

  • Creates a thick, armor-like surface that protects the original exterior masonry or wood surface from weather damage.
Two Tex Cote technician spraying primer on outer wall

Step 7 - Coating Inspection

Procedure:

  • After the TEX•COTE COOLWALL® Textured or Smooth Primer application, the entire house is carefully inspected for proper thickness, uniform appearance and areas that might have been missed.

Results:

  • Assures uniform textured or smooth appearance.
  • 􀀊Assures maximum protection.
Two Tex Cote technician inspecting outer wall

Step 8 - Second Coat of Armor - The TEX•COTE® COOLWALL® Finish

Procedure:

  • Sprayed on thick using heavy duty equipment at a pressure of up to 3000 psi.

Results:

  • Adds color of your choice (wide range of colors to choose from).
  • 􀀊Bonds with the TEX•COTE® COOLWALL® Textured or Smooth Primer to form a second barrier of protection.
  • This revolutionary Patented, Heat Reflective Shield (finish) is significantly more reflective than traditional paints and coatings in the same color.
  • Can provide up to a 40° F difference in lower surface temperatures in many colors.*

*Percentage of cooling costs and surface temperature reductions will vary based on color chosen, geographical location, climate condition, and substrate type. In some climates there may be a heating penalty. For more information, visit www.texcotehomes.com

Two Tex Cote technicians applying TEX•COTE® COOLWALL® Finish on outer wall

Step 9 - TRIM•COTE®

Procedure:

  • Loose paint is scrapped and sanded.
  • Deteriorated area is prepared, caulked and patched using TEX•BOND™ and FLEX•PATCH®, specially formulated bonding and patching materials.
  • Caulking shall be performed around windows, doors, metal flashings, and other areas of water penetration.
  • A primer is applied. TRIM•COTE® is applied. This special formulation will give lasting beauty and stand up longer to the UVs as compared to ordinary trim paint. TRIM•COTE™ is warranted for as long as you own your home.

Results:

  • Provides the most consistent surface possible
  • Coordinates appearance with TEX•COTE® Textured or Smooth Coating surface.
  • Contains a revolutionary Heat Reflective Shield (finish) in a wide variety of colors.
  • TRIM•COTE™ is available in both satin and semi-gloss finishes.
Close up of a window trim being painted in blue with and inset image of the window's trime before and after being painted

Step 10 - Clean Up & Complete Coating Inspection

Procedure:

  • Masking is removed. Lawns, shrubs and other surfaces are cleaned of any debris.
  • All walls and trim surfaces are carefully inspected for proper thickness and uniform appearance.

Results:

  • Property left TIDY CLEAN and BEAUTIFUL!
Tex Cote technician removing masking from window on outer wall